Showing
1 - 25 of 116 Records
Guardian Head, 3D model
- Title Translation: 天王、护法力士头 , 3D 模型
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: The head with frowning expression comes from a guardian figure on the south wall of Cave 10.
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D 模型
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: The head appears to be from a bodhisattva on the west wall of Cave 1.
Flying Divinity, 3D model
- Title Translation: 飞天 , 3D 模型
- Period: Eastern Wei, 534-550 C.E.
- Project: Tianlongshan Caves
- Work Description: The figure in flight among clouds holds an alms bowl up behind it.
Flying Divinity, 3D model
- Title Translation: 飞天 , 3D 模型
- Period: Eastern Wei, 534-550 C.E.
- Project: Tianlongshan Caves
- Work Description: The heavenly figure in flight looking backward is from the ceiling of Cave 3.
Bodhisattva Relief, 3D model
- Title Translation: 菩萨浮雕 , 3D 模型
- Period: Eastern Wei, 534-550 C.E.
- Project: Tianlongshan Caves
- Work Description: The bodhisattva Manjusri was located on the east wall of Cave 2 near the front of the cave, opposite a relief figure of Vimalakirti.
Bodhisattva Relief, 3D model
- Title Translation: 菩萨浮雕 , 3D 模型
- Period: Eastern Wei, 534-550 C.E.
- Project: Tianlongshan Caves
- Work Description: The bodhisattva is Manjusri and would have been situated in Cave 3 opposite the relief figure of Vimalakirti.
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D 模型
- Period: Sui, 581-618 C.E.
- Project: Tianlongshan Caves
- Work Description: The head, from the north wall of Cave 8, was damaged and rather extensively repaired when acquired. The restored portions have since been removed.
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D 模型
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: The elaborate crown can be seen on a number of bodhisattva heads from cave 16. This head is from the north wall niche, east side
Bodhisattva Standing, 3D model
- Title Translation: 立菩萨 , 3D 模型
- Period: unknown
- Project: Tianlongshan Caves
- Work Description: The reddish sandstone figure is not known to be from any of the Tianlongshan caves.
Finial Bird, 3D model
- Title Translation: 瑞鸟 , 3D 模型
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: The bird once stood at the top of a column on the north wall of Cave 16 looking back toward the Buddha image.
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D 模型
- Period: unknown
- Project: Tianlongshan Caves
- Work Description: Though attributed to the caves, the head is unlike others known to be from Tianlongshan. The smooth contour of the back indicates that it was not cut from the wall of a cave.
Bodhisattva Standing, 3D model
- Title Translation: 立菩萨 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: historical photographs show that the standing figure is from the east wall of Cave 14. The hands in front of the torso were already missing in the last century. The head is now in the British Museum.
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The head is believed to be from a standing bodhisattva on the west wall of Cave 17.
Bodhisattva Lion, 3D model
- Title Translation: 菩萨狮子 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: Cave 20 contained this bodhisattva Manjusri seated on a lion. The lion has been heavily restored.
Cave 8
- Title Translation: 第八窟 , 3D模型
- Period: Sui, 581-618 C.E.
- Project: Tianlongshan Caves
- Work Description: Cave 8 is the largest of the caves at Tianlongshan with the exception of Cave 9, the colossal Buddha cave. It is the only central pillar cave at the site and the only cave known to be of the Sui dynasty (581-618). It has a porch three bays wide that is largely preserved. The traces of two guardian figures standing at the sides of the entrance can still be seen. At the right side of the porch there is a stele with a long inscription dated to the fourth year of the kaihuang reign period, or 584. It records the persecution of Buddhism in the preceding Northern Zhou period after the conquest of Northern Qi, and its restoration with the rise of the Sui dynasty. The cave is dedicated by a Sui official to the well-being of the Sui emperor Wen (r. 581-604) and his son Yang Guang, the prince of Jin. The main chamber of Cave 8 is square in plan with a large square central pillar. It has three niches around the back and side walls and four niches on the central pillar, each with a central seated Buddha and standing attendants.
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The head is from the seated bodhisattva formerly in Cave 17 on the east wall, north side. The body is now in the Nelson Atkins Museums of Art.
Buddha Head, 3D model
- Title Translation: 佛头 , 3D 模型
- Period: unknown
- Project: Tianlongshan Caves
- Work Description: The head has unusual features and does not appear to have been cut from a cave wall and therefore its attribution to Tianlongshan is questionable.
Flying Divinity, 3D model
- Title Translation: 飞天 , 3D 模型
- Period: Eastern Wei, 534-550 C.E.
- Project: Tianlongshan Caves
- Work Description: The heavenly divinity carved in relief is holding a bowl in the gesture of offering.
Flying Divinity, 3D model
- Title Translation: 飞天 , 3D 模型
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: The heavenly musician from the ceiling of Cave 16 plays a pipa or lute-like instrument.
Flying Divinity, 3D model
- Title Translation: 飞天 , 3D 模型
- Period: unknown
- Project: Tianlongshan Caves
- Work Description: The flying divinity carving is not known to be from any existing cave at Tianlongshan.
Flying Divinity, 3D model
- Title Translation: 飞天 , 3D 模型
- Period: unknown
- Project: Tianlongshan Caves
- Work Description: The flying divinity is attributed to Tianlongshan, but it is not known to be from any existing cave at the site.
Buddha Head, 3D model
- Title Translation: 佛头 , 3D 模型
- Period: unknown
- Project: Tianlongshan Caves
- Work Description: Because the Buddha head appears to be carved of limestone with the upper portion restored, it cannot be identified with any of the Tianlongshan caves.
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The head is from the seated bodhisattva on the east wall of Cave 17 at the proper left side of the Maitreya Buddha.
Guardian Standing, 3D model
- Title Translation: 天王、护法力士立像 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The muscular body and fierce expression of this door guardian from Cave 17 create a vivid impression of strength.
Buddha Head, 3D model
- Title Translation: 佛头 , 3D 模型
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: The large head is from the niche on the west wall of Cave 1.