Showing
826 - 850 of 975 Records
Cave 18
- Title Translation: 第十八窟
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: Cave 18 is one of the most important Tang dynasty caves. Its remaining sculptures are better preserved than the sculptures in many other caves. Though they are damaged and a few completely removed, they still show the excellent quality of the carving as well as the arrangements and poses of the figures to a large extent. In recent years the cave was sealed to protect its contents.
Tianlongshan Caves
- Title Translation: 天龙山石窟
- Period: Eastern Wei, Northern Qi, Sui, Tang, 534-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The main site of Tianlongshan is located near the top of the mountain, 1,700 meters above sea level, on two sectors of a fissured sandstone cliff. The caves extend horizontally for about 500 meters across the two adjoining cliffs that are known as the Eastern and Western Peaks. The Tianlongshan grottoes are mostly of small and medium scale, square chambers with images on raised altars principally around the back and side walls. One of the caves is a central pillar cave with image niches cut into the central pillar and the walls around it, and there are also colossal images carved into the cliffside where a large multistory pavilion is built over them. Caves 1-8 and the four upper level caves are in the east sector of the site, and Caves 9-21 in the west sector. This is a general view of caves (including Cave 1-8 ) on the eastern peak.
Cave 10
- Title Translation: 第十窟
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: Cave 10 is a Northern Qi cave that is just west of the colossal sculptures and wooden structure of Cave 9. It is accessible through an opening in the east wall adjacent to Cave 9. The entrance porch is now high above path in front of the cave. Still partially preserved on the west side, it has one large pillar remaining on the west side. The entrance porch has two guardian figures standing outside, one of which mostly remains. Like the other caves of the Northern Qi period at Tianlongshan, this is one of the larger caves, its interior a square chamber more than three meters on each side with figures carved on four walls. There are recessed niches on the back and side walls that contain most of the principle sculptural images. Smaller figures of musicians and lions appear along the front of the low altar.
Cave 1
- Title Translation: 第一窟
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: Cave 1 is located at the far eastern end of the Tianlongshan caves site more than thirty meters from the the next cave, Cave 2. It is one of the larger caves, believed to be of the Northern Qi period. The facade still has part of the eave over the entrance porch showing architectural elements of posts and brackets and tiled roof carved in stone. The porch is about 3.5 meters wide and has an old stele carved on the right side. There was a dedicatory inscription carved on it, but only a few characters are now legible. The interior is a square chamber with niches on the back and side walls, each formerly containing a seated Buddha and two bodhisattvas.
Cave 14
- Title Translation: 第十四窟
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: Cave 14 is a Tang cave that had finely carved sculptures, many of which are now in collections outside China
Cave 17
- Title Translation: 第十七窟
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: Cave 17 directly adjacent to Cave 16 to the west, is one of the most important Tang dynasty caves and had a stele carved on the east side of the porch whose inscription is now entirely unreadable. The porch formerly had two muscular lishi figures guarding the entrance that are now missing. The interior chamber is about two meters square in plan with a low altar around three walls on which there were thirteen fine sculptural images—three seated Buddhas, four standing bodhisattvas, and six seated bodhisattvas. The figures are distinctive in their appearance, and they were well preserved a century ago. As a result, they were targeted, and numerous fragments taken from Cave 17 are known in museums outside China. To the west of Cave 17 and slightly below are two small carved relief stupas that were probably made to hold relics of the deceased. The openings in the stupa chamber are now empty.
Buddha Head, 3D model
- Title Translation: 佛头 , 3D 模型
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: This Buddha head is from main image in the niche on the west wall of Cave 16.
Guardian Head, 3D model
- Title Translation: 天王、护法力士头 , 3D 模型
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: The head is from one of the military-looking guardian figures on the west side of the porch outside of Cave 16.
Flying Divinity, 3D model
- Title Translation: 飞天 , 3D 模型
- Period: Eastern Wei, 534-550 C.E.
- Project: Tianlongshan Caves
- Work Description: The fluttering scarves and clouds surrounding the figure give it a sense of flight and movement.
Flying Divinity, 3D model
- Title Translation: 飞天 , 3D 模型
- Period: Eastern Wei, 534-550 C.E.
- Project: Tianlongshan Caves
- Work Description: The flying divinity or apsaras is one of four such figures carved in relief around a a large central lotus blossom on the ceiling of Cave 2.
Flying Divinity, 3D model
- Title Translation: 飞天 , 3D 模型
- Period: unknown
- Project: Tianlongshan Caves
- Work Description: The rather high relief carving of a heavenly musician playing a lute is not known to be from any existing Tianlongshan cave.
Flying Divinity, 3D model
- Title Translation: 飞天 , 3D 模型
- Period: unknown
- Project: Tianlongshan Caves
- Work Description: The divinity is carved in unusually high relief and is not known to be from any existing Tianlongshan cave.
Disciple Relief, 3D model
- Title Translation: 弟子浮雕 , 3D 模型
- Period: Eastern Wei, 534-550 C.E.
- Project: Tianlongshan Caves
- Work Description: Two figures of disciples, one youthful and one elderly, frequently appear together as attendants of the Buddha.
Buddha Head, 3D model
- Title Translation: 佛头 , 3D 模型
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: The handsome Buddha head is one of three from the main niches of Cave 16, created in the Northern Qi period.
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D 模型
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: The large head is from the cross-ankled Maitreya bodhisattva image in the east wall niche of Cave 10.
Guardian Head, 3D model
- Title Translation: 天王、护法力士头 , 3D 模型
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: The head is from a figure dressed in military garb, formerly standing inside Cave 16 on the east side of the entrance.
Buddha Head, 3D model
- Title Translation: 佛头 , 3D 模型
- Period: Sui, 581-618 C.E.
- Project: Tianlongshan Caves
- Work Description: The head is believed to be from Cave 8.
Bodhisattva Seated, 3D model
- Title Translation: 坐菩萨 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The unusually well-preserved bodhisattva figure seated in royal ease has one hand raised, holding a jewel.
Devotee Relief, 3D model
- Title Translation: 信徒浮雕 , 3D 模型
- Period: Eastern Wei, 534-550 C.E.
- Project: Tianlongshan Caves
- Work Description: The devotees hold an incense burner and long-stemmed lotus buds as offerings.
Disciple Relief, 3D model
- Title Translation: 弟子浮雕 , 3D 模型
- Period: unknown
- Project: Tianlongshan Caves
- Work Description: The relief figure, though called a monk, has a Buddha's head. It may be a composite assemblage of fragments with restorations.
Tianlongshan Caves
- Title Translation: 天龙山石窟
- Period: Eastern Wei, 534-907 C.E.
- Project: Tianlongshan Caves
Tianlongshan Caves
- Title Translation: 天龙山石窟
- Period: Eastern Wei, 534-907 C.E.
- Project: Tianlongshan Caves
Bodhisattva Standing, 3D model
- Title Translation: 立菩萨 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The figure is likely to be from one of the smaller caves at Tianlongshan where it stood as an attendant to the Buddha with hands held together in reverence.
Bodhisattva Standing, 3D model
- Title Translation: 立菩萨 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The figure is likely to be from one of the smaller caves at Tianlongshan where it stood as an attendant to the Buddha with hands held together in reverence.
Buddha Head
- Title Translation: 佛头
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: This Buddha head is from main image in the niche on the west wall of Cave 16.