Showing
51 - 75 of 188 Records
Bodhisattva Standing
- Title Translation: 菩萨立像
- Period: Sui, 581-518 C.E.
- Project: Xiangtangshan Caves
- Work Description: Standing Guanyin Bodhisattva, head and both hands broken off. The smoothly falling robe forms thin ornamental folds.
550 - 577
Bodhisattva Head
- Title Translation: 菩萨头
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
- Work Description: Both the Eastern Wei (535–50) and the Northern Qi dynasties were ruled from a capital at Ye (presentday Linzhang) in southern Hebei province; both sponsored the construction of new cave temples. The complex built at Xiangtangshan (not far from the capital) dates from the Northern Qi period. It consists of two sites: the three enormous cave temples at the top of the mountain are known as Northern Xiangtangshan, while an additional seven smaller shrines, about nine miles to the south, are known as Southern Xiangtangshan. This head comes from the southern site, which was constructed slightly later.
550 - 577
Bodhisattva Head
- Title Translation: 菩萨头
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The head is from the seated bodhisattva formerly in Cave 17 on the east wall, north side. The body is now in the Nelson Atkins Museums of Art.
618 - 907
Bodhisattva Standing
- Title Translation: 立菩萨
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: historical photographs show that the standing figure is from the east wall of Cave 14. The hands in front of the torso were already missing in the last century. The head is now in the British Museum.
618 - 907
Bodhisattva Standing
- Title Translation: 立菩萨
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The bodhisattva standing in a pose of reverence is from the west wall of Cave 17. The head is not original.
618 - 907
Bodhisattva Seated
- Title Translation: 坐菩萨
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: This fine large figure once occupied a lotus throne beside the principle Buddha image in Cave 21. It has a head made in the last century as a replacement for the original one, now in the Metropolitan Museum of Art.
618 - 907
Bodhisattva Seated
- Title Translation: 坐菩萨
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The bodhisattva figure is seated in a pose of royal ease, with right leg bent out to the side and with the foot resting on the throne beside the left knee. The head is a modern replacement for the original head, now in the Barnes Foundation Museum.
618 - 907
Bodhisattva Head
- Title Translation: 菩萨头
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The head and jewelry are very similar to those of a seated figure once located on the north wall of Cave 17.
618 - 907
Bodhisattva Seated
- Title Translation: 坐菩萨
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: This finely carved headless figure sits in a posture of royal ease.
618 - 907
Bodhisattva Head
- Title Translation: 菩萨头
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The head is believed to be from the east wall of Cave 4.
618 - 907
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The head is from the standing bodhisattva figure on the east wall of Cave 14.
618 - 907
Bodhisattva Standing, 3D model
- Title Translation: 立菩萨 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The bodhisattva, one of a pair of standing bodhisattvas from Cave 4, holds a loop of his long trailing scarf in one hand.
618 - 907
Bodhisattva Head, 3D model
- Title Translation: 菩萨头 , 3D 模型
- Period: Northern Qi, 550-577 C.E.
- Project: Tianlongshan Caves
- Work Description: The bodhisattva head from the east wall of Cave 10 wears a crown with floral panels and jeweled tassels.
550 - 577
Bodhisattva Standing, 3D model
- Title Translation: 立菩萨 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: The bodhisattva standing in a pose of reverence is from the west wall of Cave 17. The head is not original.
618 - 907
Bodhisattva Standing, 3D model
- Title Translation: 立菩萨 , 3D 模型
- Period: Tang, 618-907 C.E.
- Project: Tianlongshan Caves
- Work Description: This standing bodhisattva is from the west wall of Cave 14. Its head is now in the Tokyo National Museum.
618 - 907
Bodhisattva Avalokiteshvara (Guanyin) with 11 heads
- Title Translation: 十一头观世音菩萨
- Period: Tang, 703 C.E.
- Project: Guangzhai Temple Qibaotai Pagoda
- Work Description: High relief carving of Guanyin of Eleven Heads standing on a lotus pedestal set within a recessed niche, which is decorated with two flying celestial beings, or apsaras. In relief within a recess. Color, gray, with gray-brown patina. Limestone.
703
Gathering of Buddhas and Bodhisattvas
- Title Translation: 诸佛菩萨云集
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
550 - 577
Standing Bodhisattva
- Title Translation: 菩萨立像
- Period: Jin, 1115-1234 C.E.
- Project: Wooden Bodhisattvas (Guanyin)
- Work Description: This figure is among the best in quality and preservation to have survived from the Jin Dynasty. The image is full-bodied yet imbued with a sense of stately movement effected by the flowing garments and twisting scarves that eddy around the figure. The deep carving and high relief drapery produce a dramatic effect of shadow and highlight, which, combined with the rich polychrome palette, result in a figure that is magnificent yet gentle, humanized and immediately appealing. A tightly folded manuscript found in a sealed cavity in the back records that this image was repaired and repainted in 1348. The names of the artisans and donors are listed, and the name of the temple given as Meditation (Hall) of the Great Cloud Monastery.
1115
1234
1234
The Eleven-Headed Bodhisattva Avalokiteśvara in a Niche
- Title Translation: 十一面观音龛
- Period: Tang, 703 C.E.
- Project: Guangzhai Temple Qibaotai Pagoda
703
Monster Kneeling, 3D model
- Title Translation: 跪鬼神 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
550 - 577
Bodhisattva Standing, 3D model
- Title Translation: 菩萨立像 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
- Work Description: Statue of bodhisattva made of hard, dark-grey limestone which has stained and discolored with age. There are traces of green, red and blue pigment on the piece. It is almost identical with C113 but there is no figure in the aureole of the tiara. C113, C150 and C151 are from Cave #2 of the Southern Xiangtangshan. C150 could be from the front shrine, one of the three shrines surrounded by the central pillar.
550 - 577
Bodhisattva Hand, 3D model
- Title Translation: 菩萨手 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
550 - 577
Bodhisattva Standing, 3D model
- Title Translation: 菩萨立像 , 3D模型
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
- Work Description: This free-standing Bodhisattva is related to the image style of the Xiangtangshan cave temples and stylistically dates to about the same time, ca. 560s–70s during the Northern Qi Dynasty in northeastern China. It possesses the characteristically columnar form of the Xiangtangshan sculptures, though the jewel forms appear slightly more subdued than usual. The posture is frontal and unbending, indicating, as with the Xiangtangshan sculptures in general, a sense of inner, irrevocable solidity and firmness. The human body is disclosed in its most primordial shape with thin, close-fitting robes smoothing out the surfaces. Jewelry makes its own symmetric patterns of heavy, raised, textured pearl chains, X-crossed in shape as they cover the frontal expanse and contrast with the sharp edges of the bands of the hems and long shoulder scarves that descend as a framing statement to the lotus pedestal. A youthful, serene face appears remote and distant, though still human, above the rather massive form. Impressive in its monumentality, this bodhisattva exemplifies the sixth-century style of early Buddhist art in China. He stands on a lotus pedestal, which signals his transcendent nature as a being that has surpassed the mundane human state in knowledge and compassion. The mass of his body and the equal distribution of weight on both feet impart an iconic quality to this object of worship.
550 - 577
Musician Sheng
- Title Translation: 菩萨头
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
- Work Description: This magnificent sculpture comes from an important complex of mountainside Buddhist shrines hewn from the living rock at Xiangtangshan in Hebei province. It originally belonged to a full-length statue of a bodhisattva (an enlightened being who has postponed nirvana in order to help achieve salvation for others); the vase in the center of the crown may identify the figure as Mahāsthāmaprāpta, one of the Eight Great Bodhisattvas of Mahayana Buddhism. The principal grottoes at Xiangtangshan were carved during the short-lived Northern Qi dynasty (550-77), which ruled much of northern China prior to the reunification of the country in 589 under the Sui (589-618).
550 - 577
Bodhisattva Standing
- Title Translation: 菩萨立像
- Period: Northern Qi, 550-577 C.E.
- Project: Xiangtangshan Caves
- Work Description: Statue of bodhisattva made of hard, dark-grey limestone which has stained and discolored with age. There are traces of green, red and blue pigment on the piece. It is almost identical with C113 but there is no figure in the aureole of the tiara. C113, C150 and C151 are from Cave #2 of the Southern Xiangtangshan. C150 could be from the front shrine, one of the three shrines surrounded by the central pillar.
550 - 577