Showing  301 - 325 of 427 Records

Showing  301 - 325 of 427 Records
Bodhisattva Head
  • Title Translation: 菩萨头
  • Period: Northern Qi, 550-577 C.E.
  • Project: Tianlongshan Caves
  • Work Description: The head with its ornate crown is from Cave 16.
550 - 577

Buddha Head, 3D model
  • Title Translation: 佛头 , 3D 模型
  • Period: Tang, 618-907 C.E.
  • Project: Tianlongshan Caves
  • Work Description: The torso appears to be from a standing bodhisattva on the east wall of Cave 6.
618 - 907

Bodhisattva Standing, 3D model
  • Title Translation: 立菩萨 , 3D 模型
  • Period: Eastern Wei, 534-550 C.E.
  • Project: Tianlongshan Caves
  • Work Description: This is an assembled figure whose body and head were taken from Cave 2 and Cave 3 respectively, both dating to the first half of the sixth century.
534 - 550

Guardian Head, 3D model
  • Title Translation: 天王、护法力士头 , 3D 模型
  • Period: Tang, 618-907 C.E.
  • Project: Tianlongshan Caves
  • Work Description: The fierce expression of this head from the entrance to Cave 17 identifies it as a protector of Buddhism.
618 - 907

Bodhisattva Relief, 3D model
  • Title Translation: 菩萨浮雕 , 3D 模型
  • Period: Eastern Wei, 534-550 C.E.
  • Project: Tianlongshan Caves
  • Work Description: The figure stands in a pose of reverence to the sculpted Buddha and bodhisattvas in the niche on the west wall of Cave 3.
534 - 550

Guardian Head, 3D model
  • Title Translation: 天王、护法力士头 , 3D 模型
  • Period: Northern Qi, 550-577 C.E.
  • Project: Tianlongshan Caves
  • Work Description: The head is from a guardian figure on the east side of the entrance porch of Cave 16. It is currently matched with a body of unknown origin.
550 - 577

Flying Divinity, 3D model
  • Title Translation: 飞天 , 3D 模型
  • Period: Northern Qi, 550-577 C.E.
  • Project: Tianlongshan Caves
  • Work Description: This heavenly musician from Cave16 plays the sheng, a wind instrument consisting of a cluster of bamboo pipes joined at the bottom.
550 - 577

Bodhisattva Standing, 3D model
  • Title Translation: 立菩萨 , 3D 模型
  • Period: Tang, 618-907 C.E.
  • Project: Tianlongshan Caves
  • Work Description: The bodhisattva wears flowing scarves and skirt that emphasize the rounded contours of the body. The head is not original.
618 - 907

Bodhisattva Seated, 3D model
  • Title Translation: 坐菩萨 , 3D 模型
  • Period: Tang, 618-907 C.E.
  • Project: Tianlongshan Caves
  • Work Description: The bodhisattva figure is seated in a pose of royal ease, with right leg bent out to the side and with the foot resting on the throne beside the left knee. The head is a modern replacement for the original head, now in the Barnes Foundation Museum.
618 - 907

Buddha Head, 3D model
  • Title Translation: 佛头 , 3D 模型
  • Period: Sui, 581-618 C.E.
  • Project: Tianlongshan Caves
  • Work Description: The head is believed to be from the Sui dynasty cave, Cave 8.
581 - 618

Buddha Head, 3D model
  • Title Translation: 佛头 , 3D 模型
  • Period: Tang, 618-907 C.E.
  • Project: Tianlongshan Caves
  • Work Description: This finely carved head of the Buddha is from the east wall of Cave 18.
618 - 907

Bodhisattva Head, 3D model
  • Title Translation: 菩萨头 , 3D 模型
  • Period: Tang, 618-907 C.E.
  • Project: Tianlongshan Caves
  • Work Description: The head has a full youthful feminine face with raised arching brows, full cheeks and small mouth. The seated bodhisattva figure from which it was taken still remains on the north wall of Cave 21.
618 - 907

Musician, 3D model
  • Title Translation: 乐伎 , 3D 模型
  • Period: Northern Qi, 550-577 C.E.
  • Project: Tianlongshan Caves
  • Work Description: This is the upper part of a musician playing the panpipes that was seated at the base of the Buddha niche on the east wall of Cave 16.
550 - 577

Buddha Head, 3D model
  • Title Translation: 佛头 , 3D 模型
  • Period: Eastern Wei, 534-550 C.E.
  • Project: Tianlongshan Caves
  • Work Description: This head is from the main Buddha image on the north wall of Cave 2.
534 - 550

Bodhisattva Head, 3D model
  • Title Translation: 菩萨头 , 3D 模型
  • Period: Eastern Wei, 534-550 C.E.
  • Project: Tianlongshan Caves
  • Work Description: The head appears to be from a standing bodhisattva on the west wall of Cave 2.
534 - 550

Guardian Standing
  • Title Translation: 天王、护法力士立像
  • Period: Northern Qi, 550-577 C.E.
  • Project: Tianlongshan Caves
  • Work Description: The site of Tianlongshan Caves is located about 40 kilometres southwest of Taiyuan city in Shanxi Province. 25 caves have survived to this day. Taiyuan, historically called Jinyang, was the auxiliary capital of the Eastern Wei (534-550 CE) and Northern Qi (550-577 CE) dynasties. The royal members of the Northern Qi were devout Buddhists. Emperors Houzhu (565-577 CE) and Youzhu (570-578 CE) had many Buddhist monasteries constructed in Jinyang, which made this capital a Buddhist centre in addition to a political hub of the time. This Heavenly King (Lokapāla) statue of the Northern Qi dynasty originally belonged to Tianlongshan Cave 10, which has a front corridor and a rear chamber. Its head formerly belonged to the Vajrapāṇibalin standing on the west side of the corridor, while the body of the Heavenly King originally stood on the west side of the front wall inside the cave. The head of the statue is carved with tightly knitted eyebrows, round bulging eyes, a high straight nose, a gaping mouth showing the upper teeth biting the lower lip, tense cubic face muscles, and a fierce and very spirited countenance. The low regal crown on the head is finely carved with motifs featuring wish-fulfilling gems, scrolling clouds and tassels. Old photographs showing the original appearance of this Heavenly King reveal that he previously had a long-shaft trident spear in his right hand and a jewelled crown on his head. The right knee is flexed, but left leg is straight – hinting a sense of motion, where the feet are on a hill-shaped pedestal with a demon crouching at the front. The upper body is bare apart from a torc over the chest, some string-like criss-cross ornaments around his neck and waist, and a streamer around the shoulders. The lower body is wrapped in a long skirt girded by a leather belt. Traces of red pigment are still visible on the surface of the present statue. This statue was stolen from the cave and taken to Japan in the early 20th century. In 1932, it was exhibited by Yamanaka & Co. Ltd in Japan. Later, it was acquired by Yurinkan Museum in Kyoto and then by a private collector in Taiwan. The chequered and proven provenance has made this extremely rare Heavenly King statue of the Northern Dynasties even rarer. It is among the gems of our Museum collection.
550 - 577

Buddha Seated, 3D model
  • Title Translation: 坐佛 , 3D 模型
  • Period: Tang, 618-907 C.E.
  • Project: Tianlongshan Caves
  • Work Description: One of the finest and best-preserved sculptures from Tianlongshan, this Buddha figure was the principal image in Cave 21.
618 - 907

Pratyekabuddha Standing, 3D model
  • Title Translation: 立缘觉佛 , 3D模型
  • Period: Northern Qi, 550-577 C.E.
  • Project: Xiangtangshan Caves
550 - 577

Buddha Head, 3D model
  • Title Translation: 佛头 , 3D模型
  • Period: Northern Qi, 550-577 C.E.
  • Project: Xiangtangshan Caves
550 - 577

Bodhisattva Standing, 3D model
  • Title Translation: 菩萨立像 , 3D模型
  • Period: Northern Qi, 550-577 C.E.
  • Project: Xiangtangshan Caves
550 - 577

Bodhisattva Head, 3D model
  • Title Translation: 菩萨头 , 3D模型
  • Period: Northern Qi, 550-577 C.E.
  • Project: Xiangtangshan Caves
  • Work Description: Both the Eastern Wei (535–50) and the Northern Qi dynasties were ruled from a capital at Ye (presentday Linzhang) in southern Hebei province; both sponsored the construction of new cave temples. The complex built at Xiangtangshan (not far from the capital) dates from the Northern Qi period. It consists of two sites: the three enormous cave temples at the top of the mountain are known as Northern Xiangtangshan, while an additional seven smaller shrines, about nine miles to the south, are known as Southern Xiangtangshan. This head comes from the southern site, which was constructed slightly later.
550 - 577

Bodhisattva Hand, 3D model
  • Title Translation: 菩萨手 , 3D模型
  • Period: Northern Qi, 550-577 C.E.
  • Project: Xiangtangshan Caves
550 - 577

Monk Kneeling, 3D model
  • Title Translation: 跪僧侣 , 3D模型
  • Period: Northern Qi, 550-577 C.E.
  • Project: Xiangtangshan Caves
  • Work Description: The North Xiangtangshan Grottoes are located in the Fengfeng mining district of Handan city, Hebei province. These caves are major Northern Qi dynasty caves that are thought to have been commissioned by imperial order. The South Cave of the grottoes was begun in 568, and the main surface and its two flanking walls are carved with large niches. This image is one of a pair of seated Buddhist priest figures carved in relief on either side of a large censer in the platform area of one of the side walls. The figure hunches over, with its mouth tightly closed as it holds something with both hands, exuding a particularly tranquil demeanor.
550 - 577

Bodhisattva Head, 3D model
  • Title Translation: 菩萨头 , 3D模型
  • Period: Northern Qi, 550-577 C.E.
  • Project: Xiangtangshan Caves
  • Work Description: Stone head of a bodhisattva made of light colored stone with traces of red and yellow pigment. This head would have originally been part of a colossal statue. The piece is a companion to C353 and very similar to it, the principal differences being that the hair is arranged in a number of plaits and the crown is more elaborate. It is believed to originally come from the North Cave of Northern Xiangtangshan.
550 - 577

Bodhisattva Head, 3D model
  • Title Translation: 菩萨头 , 3D模型
  • Period: Northern Qi, 550-577 C.E.
  • Project: Xiangtangshan Caves
  • Work Description: Stone head of a bodhisattva made of light colored stone with traces of red and light green pigment. This head would have originally been part of a colossal statue. The urna, represented by a round socket, would have originally contained some kind of precious stone or crystal sphere. The hair is smooth and parted in the middle. The crown has three peaks with a fillet around the base of the ushnisha. C353 and C354 are a pair from the North Cave of Northern Xiangtangshan.
550 - 577